Softpanorama
(slightly skeptical) Open Source Software Educational Society

May the source be with you, but remember the KISS principle ;-)

Google   

Sun Advanced Lights Out Manager(ALOM)

News Solaris Recommended Links ALOM setup History Humor Etc
             

ALOM software is pre-installed on the server and is active at the first power on. Although normally you will not need to download this software, it is provided here as a convenience should you ever have to reinstall the feature or wish to upgrade to a newer version.

The online Help documentation  that is available for download may be a later version than the Help documentation shipped on the Server Documentation CD. It is recommended that you download the latest version, in order to have the most up-to-date and accurate Help documentation.

For proper setup be sure to read the detailed information in README file contained in the software download.  It is always important to check for the latest ALOM patches at SunSolve.sun.com.

Notes:
  • This is a Spartan WHYFF (We Help You For Free) site written by people for whom English is not a native language. Some amount of grammar and spelling errors should be expected.
  • The site contain some broken links as it develops like a living tree... Please try to use Google, Open directory, etc. to find a replacement link (see HOWTO search the WEB for details). We would appreciate if you can mail us a correct link.
Google Search
Open directory
Research Index

News

Guys,

I'm falling back to you all, even though I know I should be able to find this answer out on google. Anyway, we've got a new SunFire V210 with ALOM. I've plugged the Serial Mgt port into my (shudder) Avocent Console Server and I can access things just fine.

But if I send a standard Sun break (^ecl0), I get the messages:

BREAK Requested - Access Denied

And the damm thing just sits there running through various steps. I can't send a break no matter what, though I admit I just did set a password for the admin user on the ALOM board just now.

I can get to the SC> prompt on the ALOM, and then send a break command, but it's friggin awkward. Anyone have a clue on how to disable this stuff, or do I need to just not use this port and instead work with the regular serial port?

Just to make it clear, I'm plugged into the RJ45 serial management port on the back. There's a DB9 serial port, I should try that too I guess...

Thanks,
John
 

Please verify the following:

1. Network cable is properly attached to NET MGT port on back panel of server (leftmost RJ-45 socket) and physical link is established. The green LED on NET MGT port should be turned on or blinking.

2. NET MGT port is connected to proper ethernet switch, i.e. you should check whether you can reach this port physically from machine you are connecting from (from your workstation).

3. Network settings are correct, i.e. IP packets are routed properly from your workstation. If you not sure please provide output from the command

/usr/platform/`uname -i`/sbin/scadm show | grep netsc

and network settings of your workstation. Here is sample output from my V240:

# /usr/platform/`uname -i`/sbin/scadm show | grep netsc
netsc_tpelinktest="true"
netsc_dhcp="false"
netsc_ipaddr="172.17.250.65"
netsc_ipnetmask="255.255.0.0"
netsc_ipgateway="172.17.255.254"

and my Windows workstation:

C:\>ipconfig

Windows IP Configuration

Ethernet adapter Local area connection:

Connection-specific DNS Suffix . : censored.ru
IP Address. . . . . . . . . . . . : 172.17.2.165
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 172.17.255.254

5. DHCP is not used for SC configuration (netsc_dhcp="false", see before)

6. There are no firewall between your workstation and V210 or firewall, if it exists, allows IP packets to pass from any port of your worksation's network interface to SC IP address port 23 and in reverse direction.

hey guys
thanks for all your replies ...
well i am still having trouble ...

i have assigned a different ALOM ip address for ALOM compared to by sunfire v210 server ...

Trobleshooting:

Please make sure that the the variable netsc_tpelinktest (BY default is TRUE ) was assigned to TRUE.

here is the showsc result:
sc> showsc
Advanced Lights Out Manager v1.3

parameter value
--------- -----
if_network true
if_modem false
if_emailalerts false
sys_autorestart xir
sys_xirtimeout 900
netsc_tpelinktest true
netsc_dhcp false
netsc_ipaddr 10.253.14.127
netsc_ipnetmask 255.255.255.0
netsc_ipgateway 10.253.14.253
mgt_mailhost
mgt_mailalert
sc_customerinfo
sc_escapechars #.
sc_powerondelay false
sc_powerstatememory false
sc_clipasswdecho true
sc_cliprompt sc
sc_clitimeout 0
sc_clieventlevel 2
sc_backupuserdata true
sys_eventlevel 2
ser_baudrate 9600
ser_parity none
ser_stopbits 1
ser_data 8
netsc_enetaddr 00:03:ba:8d:4b:96
sys_hostname wdc-ols-int
sys_enetaddr 00:03:ba:8d:4b:8d
 

 

Recommended Links

In case of broken links please try to use Google search. If you find the page please notify us about new location
Google     

Using Help

Download Center - Download

 

Copyright © 1996-2008 by Dr. Nikolai Bezroukov. www.softpanorama.org was created as a service to the UN Sustainable Development Networking Programme (SDNP) in the author free time. Submit comments This document is an industrial compilation designed and created exclusively for educational use and is placed under the copyright of the Open Content License(OPL). Original materials copyright belong to respective owners. Quotes are made for educational purposes only in compliance with the fair use doctrine.

Standard disclaimer: The statements, views and opinions presented on this web page are those of the author and are not endorsed by, nor do they necessarily reflect, the opinions of the author present and former employers, SDNP or any other organization the author may be associated with. We do not warrant the correctness of the information provided or its fitness for any purpose.

Last updated: June 02, 2008